The DC current sensor is a reliable and technologically advanced DC large current measuring instrument, which is widely used in metallurgy, chemical industry, carbon and other industries. The instrument can output standard voltage and current signals at the same time, and is used to match other instruments as a signal source for monitoring and control. The product consists of a sensor head and a signal box. The sensor head is a split frame aluminum alloy shell structure, and the circuit box is a waterproof, anti-corrosion, and electrostatically shielded aluminum alloy shell. It is mainly used in metallurgy, chemical industry, carbon and other industries as a large current precision measurement and detection device, and can also be used as a control element.
Whether the DC current sensor is correctly installed has a great impact on the use effect. In order to ensure the normal use of the DC current sensor in the future, it is also very important to install the equipment correctly. Let us share some installation tips below.
- Determine the installation method according to the site conditions and the size of the sensor head, and then make the bracket base plate (or pad) according to the required size. The bracket base plate material can be made of non-magnetic materials such as plastic board, epoxy board, bakelite board or hardwood board. If ferromagnetic material is used as the sensor head installation bracket, non-magnetic materials such as wood blocks should be used as pads to keep the distance between the sensor and the bracket greater than 80 mm.
- The conductive busbar to be measured should be placed in the center of the sensor head window and required to be perpendicular to the sensor plane.
- The installation position of the sensor head should be as far away from other conductive busbars as possible and away from the corners of the busbar to be measured.
- The distance between the circuit box and the sensor head is recommended to be within 10 meters, and the special cable can be lengthened as needed.
- The cable plug and the two sockets in the lower half ring of the sensor head can be connected arbitrarily, and the remaining socket in the lower half ring is connected to the socket in the upper half ring with a jumper cable.
Hangzhi hakkında
Shenzhen Hangzhi Hassas Elektronik Co., Ltd. is a technology-leading enterprise dedicated to the research and development, production, sales and solution customization of high-precision current sensors, voltage sensors and high-precision electrical measuring instruments. We strive to build a well-known brand of fluxgate precision current sensors and precision electrical measuring instruments in the DC field, and strive to develop into an internationally leading leader in precision electronics in the field of DC systems.
Türkçe 
English 
Español 
Português 
Français 
Deutsch 
Русский 
العربية 
Nederlands 
Português do Brasil 
English (Canada) 
English (UK) 
한국어 
日本語 
English (Australia) 
Deutsch (Österreich) 
Polski 
Nederlands (België) 
Français de Belgique 
Dansk 
Svenska 
Deutsch (Schweiz) 
Italiano 
English (South Africa) 
Română 
Magyar 
Čeština 
Suomi 
Bahasa Indonesia 
Español de Argentina 
Español de Chile 
Español de Perú 
Español de México 
Ελληνικά