Hangzhi Precision

High Precision Current Transducer, Voltage Transducer & Tester Manufacturer

How to Use Hangzhi Fluxgate Current Transducers

/ Knowledge Center / By

1. How to use AIT high precision fluxgate current transducers

1.1 How to wire AIT high precision current transducer

Hangzhi high precision current transducer / sensor products were developed on the basis of Multi-Point Zero Flux Gate technology, which can be applied for both AC and DC current measurement application, with analogical current, digital signal via RS232/485 & 0-10V voltage output options available. All Hangzhi high precision current transducer / sensor products are CE EMC & RoHS compliant.

how to use AIT high precision fluxgate current transducer

1.2 How to measure with AIT high precision current transducer

Important Note:

The resistance connected to the output terminal of the sensor should be within the range specified in the datasheet.

(a) When the sensor does not pass current, the voltage on the resistor R is about 0V
(b) When the device is working normally after power on, the green indicator light is always on
(c) When the sensor passes a DC current, the voltage on the resistor R is:
U = Measured Current / Sensor Turns Ratio * Resistance R

If the output voltage is abnormal:

(a) First use a multimeter to measure the power supply of the sensor and check whether the power supply is wired correctly;

(b) Check whether the running indicator and the power supply indicator are displayed normally.

2. How to use HIT hall-effect replacement and IIT industrial fluxgate current transducers

2.1 How to wire HIT & IIT current transducer

The wiring method of the HIT and IIT current transducer is almost the same, please find the details below:

However, there is no operation indicate LED on HIT current transducers.

how to wire hit fluxgate current transducers
how to wire iit fluxgate current transducers

2.2 How to measure with HIT hall-effect replacement current transdudcer

(2) Test method: 
The resistance connected to the output terminal of the sensor should be within the range specified in the datasheet. 

When the wiring is correct and working normally:
(a) When the sensor does not pass current, the voltage on the resistor Rm is about 0V;
(b) When the sensor passes a DC current, the voltage on the resistor Rm is:
U = Measured Current / Sensor Turns Ratio * Resistance Rm

3. How to use RIT leakage current transducers

3.1 How to wire RIT leakage current transducer

how to wire rit leakage current transcuders

3.2 How to measure with RIT leakage current transducer

(2) Test method: 
The output terminal of the sensor is connected to the voltage meter or analogical input module

When the wiring is correct and working normally:
(a) When the primary current is 0A, the output voltage of the sensor is about 0V;
(b) After the device is powered on, when the device is working normally, the green indicator light is always on;
(c) When the sensor passes DC current, the primary current Ip is:
Ip=Kn*Uoutput

If the current is abnormal or the power supply is abnormal:
(a) First use a multimeter to measure the power supply of the sensor and check whether the power supply is wired correctly;

Get in touch with our experts

Contact us directly via email info@hangzhiprecision.com or fill out the form below. We will respond as soon as possible.

en_AUEnglish (Australia)
en_USEnglish es_ESEspañol pt_PTPortuguês fr_FRFrançais de_DEDeutsch ru_RUРусский arالعربية nl_NLNederlands tr_TRTürkçe pt_BRPortuguês do Brasil en_CAEnglish (Canada) en_GBEnglish (UK) ko_KR한국어 ja日本語 de_ATDeutsch (Österreich) pl_PLPolski nl_BENederlands (België) fr_BEFrançais de Belgique da_DKDansk sv_SESvenska de_CHDeutsch (Schweiz) it_ITItaliano en_ZAEnglish (South Africa) ro_RORomână hu_HUMagyar cs_CZČeština fiSuomi id_IDBahasa Indonesia es_AREspañol de Argentina es_CLEspañol de Chile es_PEEspañol de Perú es_MXEspañol de México elΕλληνικά en_AUEnglish (Australia)

Select country